Ricoh D146 Service Manual page 1882

* This setting can be used for the remote machine.
No Function
0 LS RX memory capacity
to threshold setting
7 00-FF (0-1020 Kbyte: Hex)
System Switch 1B - Not used (do not change these settings)
System Switch 1C - Not used (do not change these settings)
No
RTI/CSI/CPS code display
0 0: Enable
1: Disable
1-7 Not used
D163
System Switch 1A (SP No. 1-101-027)
System Switch 1D (SP No. 1-101-030)
Function
Comments
Sets the value to x4KB. When the amount of
available memory drops below this setting, RX
documents are printed to conserve memory.
Initial setting 0x80 (512 KB)
NOTE: If a customer wants available memory
size to be larger, decrease this threshold
Comments
0: RTI, CSI, CPS codes are displayed on the
top line of the LCD panel during
communication.
1: Codes are switched off (no display)
Do not change these settings.
106 SM