Ricoh D146 Service Manual page 1883

No Function
Communication after the
Journal data storage area has
0 become full
0: Impossible
1: Possible
Action when the SAF memory
has become full during
1* scanning
0: The current page is erased.
1: The entire file is erased.
RTI/CSI display priority
2
0: RTI 1: CSI
SM
System Switch 1E (SP No. 1-101-031)
0: When this switch is on and the journal
history becomes full, the next report prints. If
the journal history is not deleted, the next
transmission cannot be received. This prevents
overwriting communication records before the
machine can print them.
1: If the buffer memory of the communication
records for the Journal is full, fax
communications are still possible. But the
machine will overwrite the oldest
communication records.
0: If the SAF memory becomes full during
scanning for a memory transmission, the
successfully scanned pages are transmitted.
1: If the SAF memory becomes full during
scanning for a memory transmission, the file is
erased and no pages are transmitted.
This bit determines which identifier, RTI or CSI,
is displayed on the LCD while the machine is
communicating in G3 non-standard mode.
Comments

This setting is effective only when
Automatic Journal printout is enabled
but the machine cannot print the report
(e.g., no paper).

This setting is effective only when
Automatic Journal printout is enabled
but the machine cannot print the report
(e.g., no paper).
107 D163