Auto Power Shut-Off Timer; Preheat Mode - Sharp MX-3070N User Manual

BEFORE USING THE MACHINE►BEFORE USING THE MACHINE
Function
Sleep Mode Power Level
Each Energy Save settings in the Power Management Setting is not applied when Custom/Eco mode is used.
To set mode settings
"Setting mode (administrator)" → select [System Settings] → [Energy Save] → [Eco Mode Settings] → [Mode Setting].

AUTO POWER SHUT-OFF TIMER

This mode turns off the power to the operation panel and the fusing unit, and makes the machine wait in the lowest
power consumption state.
Auto Power Shut-Off Timer will activate when the set duration of time elapses in waiting status without executing a job.
Compared to preheat mode, the power-saving rate is considerably higher but the wakeup time is longer.
The [Power Save] button blinks when the machine is in Auto Power Shut-Off Timer.
Auto Power Shut-Off Timer is also activated by pressing the [Power Save] button while the [Power Save] button is not lit.
This mode is cleared when print data is being received, fax data is being output, or when the [Power Save] button is
pressed while it is blinking.
To set Auto Power Shut-Off Timer:
In "Setting mode (administrator)", select [System Settings] → [Energy Save] → [Eco Mode Settings] → [Auto Power
Shut-Off].
A message appears 15 seconds before Auto Power Shut-Off Mode is entered.
To close the message and continue normal operation, tap the [Continue] button.
The message appears again 15 seconds before the end of the extension of normal operation time.
If no action is taken within 15 seconds after the message appears, the machine enters auto power shutoff mode.
To set display of the message:
In "Setting mode (administrator)", select [System Settings] → [Energy Save] → [Eco Mode Settings] → [Auto Power
Shut-Off].

PREHEAT MODE

This mode lowers the temperature of the fusing unit and makes the machine wait in low power consumption state.
Preheat mode will activate when the set duration of time elapses in waiting status without executing a job.
Compared to Auto Power Shut-Off Timer, the amount of energy saved is less and the wakeup time is shorter.
In the preheat mode, the [Home Screen] button is lit and the light goes off for the touch panel and the [Power Save
Mode] button.
Custom
Low Power
[Power Save] button/indicator
1-27
Eco
Low Power