Selecting The Orientation And Size Of The Original - Sharp MX-3070N User Manual

COPIER►BASIC PROCEDURE FOR MAKING COPIES
SELECTING THE ORIENTATION AND SIZE
OF THE ORIGINAL
When the original size is a non-standard size or is not detected correctly, manually specify the original size.
Set the orientation of the image to ensure that the orientation of the placed original is correctly recognized.
• Set the orientation and size of the original before scanning the original.
• The original size is set in normal mode.
Specifying the orientation and size of an inch-size original
Tap the [Original] key to set the orientation of the original.
1
► COPY MODE (page 2-3)
Tap the [Detail] key to change to normal mode.
2
► Changing mode from each mode (page 2-5)
Tap the [Original] key.
3
Tap the [Inch] tab.
4
5
Original
8½x11
Auto
AB Inch
5 ½x8 1/2
5 ½x8 1/2R
8 ½x11
Others
No. of copies Color Mode
1
2-Sided Copy
Original Orientation
Background Adjustment
Blank Page Skip
Skip Blank Page in Original
Direct Entry
Custom Size
Copy Ratio
Enlarge/Reduce Copy
8 ½x11R 11x17
8 ½x13 8 ½x13 2 /
5
8 ½x14
Preview
B/W
Start
4 11x17
Tap the appropriate original size key.
After the settings are completed, tap
CA
Color
Start
2-33
.