Setting Scan Settings Automatically (Auto Set); Checking The Image To Be Transmitted - Sharp MX-3070N User Manual

SCANNER/INTERNET FAX►TRANSMITTING AN IMAGE
Tap the [Grayscale] or [Mono2] key to set the B/W mode for automatic color
4
selection.
Specify whether Mono2 or grayscale is used when scanning black and white originals. Note that if the file format is set to
JPEG, scanning will take place in grayscale.
After the settings are completed, tap
The B/W mode can be set only when the [Auto] key is selected in the color mode setting (step 2).
SETTING SCAN SETTINGS AUTOMATICALLY
(Auto Set)
To automatically set scan settings appropriate for the original, tap the [Auto Set] key in the base screen of Easy Mode.
Original
Address E-mail Address
8½x11
Original Resolution
Auto 200x200dpi
CA
Preview Auto Set
The following functions are set automatically.
• Image Orientation
• Resolution
• Blank Page Skip
When "Auto Set" is enabled, grayed out functions cannot be enabled.
CHECKING THE IMAGE TO BE
TRANSMITTED
Check the image that will be sent in the touch panel before transmission.
When you use the auto document feeder to scan an original, you can tap the [Preview] key to check a preview of the
image before sending an image. As you can adjust the exposure and resolution to scan the original while checking it in
the preview screen, you can send a better quality original to the destination.
• Depending on the size of the transmission data, part of the preview image may not appear in the preview screen in the
touch panel.
• The preview function is not available when the original size is set to Long Size.
.
Detail
Blank Page
File Format
Skip
PDF
OFF
PDF
B/W Color
Start Start
5-59