Sharp MX-3070N User Manual page 740

SYSTEM SETTINGS►SYSTEM SETTINGS
Port Switching Method
Selects when port switching takes place.
Switch at End of Job
The port changes to auto selection when printing ends.
Switch after I/O Timeout
When the time set in "I/O Timeout" elapses, the port changes to Auto Selection.
• The following two print ports are available on the machine:
• USB Port
• Network port
Initial Status
If you print data in an environment where the printer driver is not used (that is, if you print data using the MS-DOS
system or if you print data using the PC that does not have the provided printer driver installed), set the detailed printing
conditions. (However, the "Disable Blank Page Print" function will be effective even when the PCL printer driver is used.)
Settings
Setup Items
No. of Prints
Orientation
Paper Size
Delivery Tray
Paper Type
Resolution Setting
Disable Blank Page Print
Two Sided
Colour Mode
*4
N-Up Print
1 - 9999 sets
• Length
• Width
Set the default paper size.
Set the default delivery tray.
Set the default paper type.
• 600dpi
• 600dpi (High Quality)
• 1200dpi
• (Enabled)
• (Disabled)
• One Sided
• 2-Sided (Booklet)
• 2-Sided (Tablet)
• Automatic
• Black & White
N-Up
• 1-Up
• 2-Up
• 4-Up
• 8-Up
Layout
*5
• Left To Right
*5
• Right To Left
*6
• Upper-Left To Right
*6
• Upper-Left To Lower
*6
• Upper-Right To Left
*6
• Upper-Right To Lower
7-83
Description