Resending To Unsuccessful Broadcast Transmission Destinations - Sharp MX-3070N User Manual

FACSIMILE►BASIC TRANSMISSION METHODS
Tap the [Start] key to start scanning of the original.
5
• If you inserted the original pages in the document feeder tray, all pages are scanned.
A beep will sound to indicate that scanning and transmission have ended.
• When you place the original on the document glass, scan each page one at a time.
When scanning finishes, place the next original and tap the [Start] key.
Repeat the procedure until all pages have been scanned and then tap the [Read-End] key.
A beep will sound to indicate that scanning and transmission have ended.
When you use the auto document feeder to scan an original, you can tap the [Preview] key and scan to check a preview
of the image. For more information, see
RESENDING TO UNSUCCESSFUL BROADCAST
TRANSMISSION DESTINATIONS
The results of a completed broadcast transmission can be checked in the job status screen. If transmission to any of the
destinations failed, resend the fax to those destinations.
1
Print Scan
Job
Address
Broadcast001
Tap the [Complete] key.
2
"CHECKING THE IMAGE TO BE TRANSMITTED (page
Check Details of
Fax Internet Fax Selected Job
Stop/Delete
Set Time Pages Status
Display Only
10:45 07/07 0001 Waiting
Own Job
Enter Multi
Selection Mode
Check Confidential
Reception Data
Back
Job Queue
Complete
Tap the job status display, and tapping
the [Fax] tab.
4-37
4-28)".