Sharp MX-3070N User Manual page 760

SYSTEM SETTINGS►SYSTEM SETTINGS
List name
Preset of Character
File Naming
No.1 ~ No.7
When stored in the address book,
change the sender name to the
contact name
Enable the [Inbound Routing] function.
1
Tap the [Administration Settings] from the menu.
Enable the [Inbound Routing] function from the setting screen.
Store the sender number or address.
2
Tap the [Sender Number/Address Registration] from the menu.
Enter the destination number or address that you wish to store.
If you wish to forward all received data, you need not store the sender number and address separately.
Store a forwarding table.
3
Tap the [Inbound Routing Settings] from the menu.
Tap the [Add] key on the displayed screen.
When the [Table Registration] screen appears, store the forwarding table.
Enable the stored forwarding table.
4
Tap the [Inbound Routing Settings] from the menu.
Set the forwarding table name that you wish to enable to
To specify forwarding conditions, select [Forward based on the Conditions of Forward Destination 1-3], and also select
[Always Forward] or [Forward on Selected Day & Time]. If you have selected the [Forward on Selected Day & Time]
option, you can set the forwarding date and time in advance.
Set the characters added to the file name when a file is saved.
When "Character 1" and "Character 2" are set in "File Naming No. 1 to No. 7", the set
characters are added to the file name.
Enter up to 64 full-width/half-width characters.
Set the information included in the file name when saving a file.
When the sender of the data is stored in the address book, the sender information is
changed to the name stored in the address book.
7-103
Settings
.