Sharp MX-3070N User Manual page 192

COPIER►BASIC PROCEDURE FOR MAKING COPIES
6
Others
Repeat Layout
No. of Faces
Back
If the calculated copy ratio exceeds the range from 25% to 400%, an error occurs.
Specify the repeat partition line.
7
After the settings are completed, tap
• To cancel the fixed repeat setting
Tap the [Off] key.
• To cancel all settings:
Tap the [CA] key.
Tap the [Color Start] or [B/W Start] key to start copying.
8
Repeat a photo size original in actual size (Photo Repeat)
Place the original on the document glass.
1
You can check the original direction by reading the "Orientation" on the Original screen.
Tap the [Detail] key to change to normal mode.
2
► Changing mode from each mode (page 2-5)
Tap the [Others] key, and then tap the [Repeat Layout] key.
3
Tap the [Photo Repeat] key.
4
Original
Change Size/Direction.
Color Mode
Background Adjustment
Exposure
Select Type/Exposure
2 Repeat
4 Repeat
8 Repeat
Preview
16 Repeat
B/W
Start
4 11x17
and [Back] keys in sequence.
Tap [No. of Faces] to set a repeat
count.
After the settings are completed, tap
The automatic calculation result is shown as the copy ratio.
CA
Color
Start
2-57
.