Sharp MX-3070N User Manual page 800

SYSTEM SETTINGS►SYSTEM SETTINGS
Show Wireless Setting Screen
Click the [Setup] button.
In the Wireless Setting screen, you can configure the SSID of a wireless LAN, Security Type, Encry., and Security Key.
Initialize Wireless Settings
Click the [Initialize] button.
The settings for SSID, Security Type, Encry., and Security Key are initialized.
Wireless Setting screen (Access Point Mode)
If the [Settings] button is clicked while [Connection Type Switching] is set to [Wired+Wireless (Access Point Mode)] or
[Wired Only], the Wireless Settings (Access Point Mode) screen is displayed.
Configure the SSID of a wireless LAN, Security Type, Encry., and Security Key.
Clicking the [Submit] button stores the settings.
SSID
Enter an SSID using up to 32 characters.
Security Type
Select a security type.
Encrypt E-mail
Select an encryption type.
Security Key
Enter a security key.
Security Type
WEP 64bit
WEP 128bit
WAP/WAP2
Show Security Key
If it is set to ON, the security key appears.
Device IP Address
Enter the IP address.
Channel
Select the channel to be used in wireless LAN.
Sending Output
Configure the sending output.
Bandwidth
Use this setting when the communication mode is "11n". Select the bandwidth to be used.
IP Address Distribution Range Setting
Configure the range to be used the IP address.
Wireless Setting screen (Infrastructure Mode)
If [Connection Type Switching] is set to [Wireless (infrastructure mode)] and the [Settings] button is clicked, the
infrastructure mode wireless setting screen is displayed.
Configure the SSID of a wireless LAN, Security Type, Encry., and Security Key. Clicking the [Submit] button stores the
settings.
5 characters or 10-digit hexadecimal number
13 characters or 26-digit hexadecimal number
8 to 63 characters or 64-digit hexadecimal number
7-143
Security Key