Forwarding Received Data; Forwarding Received Faxes(Fax Data Forward) - Sharp MX-3070N User Manual

FACSIMILE►FAX RECEPTION

FORWARDING RECEIVED DATA

FORWARDING RECEIVED FAXES(FAX DATA
FORWARD)
When the machine cannot print because it is out of paper or out of toner, received faxes can be forwarded to another
previously stored fax machine. Store a recipient by selecting
7-170)] in Setting mode.
This function is convenient in an office or work area that has two or more telephone lines and another fax machine is
connected to a different line than the machine.
The machine
• If some pages of a fax that is being forwarded were successfully printed, only those pages that were not printed will be
forwarded.
• A forwarded fax becomes a fax transmission job. If transmission does not take place because the transmission was
canceled or an error occurred, the fax will be held in memory until it can be printed.
• All faxes received are forwarded. Note, however, that faxes received and stored in an F-code confidential memory box
cannot be forwarded.
• If a password entry screen appears after tapping the [OK] key, "Hold Setting for Received Data Print" has been enabled.
Enter the password using the numeric keys to begin forwarding.
► PRINTING A PASSWORD-PROTECTED FAX (Hold setting for received data print) (page 4-53)
1
CLOUD PORTAL
Operation Enlarge
Guide Display Mode
Tap the [System Settings] → [Image Send Settings] →
2
[Fax Data Receive/Forward (Manual)] key.
PRINTING DOES NOT TAKE PLACE
Forward
Received Data
Easy Easy Easy
Copy Scan Fax
Settings Total Count LCD Control Job Status
[Set the Telephone Number for Data Forwarding (page
Forward Destination
Make sure that the fax reception / data
indicator is blinking, and tap the
[Settings] key in the home screen.
4-57
Prints