Sharp MX-3070N User Manual page 154

COPIER►BASIC PROCEDURE FOR MAKING COPIES
3
2-Sided Copy
1 → 1 1 → 2
CA
Preview
The [2→2] key and [1→2] key cannot be used when copying from the document glass.
4
Original
8½x11
Paper
2-Sided Copy
Select
8½x11
Tray 1
CA
Preview
Depending on the size of the placed original, there may be cases where the same size of paper as the original is not
selected automatically. In this event, change the paper tray manually.
Tap the [Color Start] or [B/W Start] key.
5
6
Preview
Scan
CA
Again
Tap the [Read-End] key to start copying.
7
(1)
2 → 2 2 → 1
Output Binding
(2)
Book Tablet
Copies
B/W Color
Start Start
Detail
Copy Ratio Staple / Punch
100% Off
1 → 1
Copies
B/W Color
Start Start
B/W Color
Start Start
Select the 2-sided copy mode.
(1) Tap the [1→2] key.
(3)
(2) When the output is set to "2-sided", select "Tablet" or
"Book" in "Output Binding".
(3) After the settings are completed, tap
Check the paper (tray) and color mode
you want to use for copying, and tap
the keys for any other settings you
want to select.
• Paper Select►page 2-13
• Copy Ratio►page 2-26
• Staple/ Punch ►page
• Color Mode►page 2-20
• Orientation►page 2-33
• Exposure►page 2-23
• N-Up►page 2-49
• Card Shot►page 2-52
Set the next original, and tap the
[Color Start] or [B/W Start] key to scan
the original.
Tap the same key you tapped in step 5.
Repeat this step until all originals have been scanned.
2-19
.
2-42, ►page 2-45