Sharp MX-3070N User Manual page 45

BEFORE USING THE MACHINE►BEFORE USING THE MACHINE
3
Main Code Registration
Main Code
To return to the billing code selection window
Tap .
(4)
4
Main Code Registration
Main Code
Sub Code
(5)
Tap the text box of [Main Code Name], then type in the main code name.
5
Specify the code name using up to 32 double- or single-byte characters.
6
Main Code Registration
Main Code
Sub Code
Available to
Public to All
Specify target
public address
The public destination of a billing code is not displayed if user authentication is not performed. The mode is automatically
set to [Public to All].
7
(Selected:1/32)
Designate Public Address
Organization /Group List
Group 1
Group 2
Group 3
Group 4
Group 5
Group 6
Group 7
Group 8
Add New
Main Code Name
Cancel and Return
End Registration
Register
Next Billing Code.
Cancel and Return
End Registration
Register
Next Billing Code.
Clear
Tap [Add New] on the action panel.
CA
Tap the text box of [Main Code], then
type in the main code.
Specify the code using up to 32 single-byte characters.
CA
If necessary, select the share range of
billing code.
Public to All: Registers the billing code as a public code for
all users who use the machine.
Specify Target Public Group: Limits the share range of
billing code to be registered only to the specified group. Up
CA
to eight groups can be specified as a public destination.
Tap and select a group as a public
destination
Up to eight groups can be specified. After the settings are
completed, tap
CA
1-42
.