Sharp MX-3070N User Manual page 577

SCANNER/INTERNET FAX►Other functions
Place the original.
1
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
► AUTOMATIC DOCUMENT FEEDER (page 1-67)
► DOCUMENT GLASS (page 1-69)
Tap the mode display to switch to the initial screen of each mode.
2
► Changing mode from each mode (page 5-9)
Specify the destination.
3
► RETRIEVING A DESTINATION FROM AN ADDRESS BOOK (page 5-15)
► VIEWING A LIST OF THE SELECTED DESTINATIONS (page 5-17)
► USING A SEARCH NUMBER TO RETRIEVE A DESTINATION (page 5-18)
► ENTERING AN ADDRESS MANUALLY (page 5-19)
► SPECIFYING A NETWORK FOLDER (page 5-20)
► RETRIEVING A DESTINATION FROM A GLOBAL ADDRESS BOOK (page 5-21)
► USING A TRANSMISSION LOG TO RESEND (page 5-23)
Tap the [Others] key, and tap the [Erase] key.
4
5
Others
Erase
Up
Left Right
Down
Back
Specify the erase edge on the reverse side when erasing edges of one to three sides of Up, Down, Left, and Right on
the front side to scan a 2-sided original.
• If the [Reverse erase position of back face.] checkbox is set to
edge on the front side will be erased.
• If the [Reverse erase position of back face.] checkbox is set to
will be erased.
Dual Page Scan
Divide into 2 Pages
Background Adjustment
Clear
Exposure
Specify density of image to send.
Outer Frame
Color Mode
Exposure
Specify Frame+Center
Specify density of image to send.
Reverse Erase Position of
The Back Face
Preview CA
Start
5-86
Tap the checkbox of the edge that you
wish to erase, and specify the erase
position.
Check that he tapped checkbox is set to
If the [Specify Frame] key is tapped, the [Up], [Down], [Left],
and [Right] checkboxes are set to
If the [Specify Frame+Center] key is tapped, all the
checkboxes are set to .
, the edge in the position opposite to the erased
, the edge in the same position as on the front side
.
.