Checking The Image Before Printing - Sharp MX-3070N User Manual

SCANNER/INTERNET FAX►INTERNET FAX RECEPTION FUNCTIONS

CHECKING THE IMAGE BEFORE PRINTING

Check the image of received data on the touch panel before printing.
This function is available when [System Settings] → [Image Send Settings] → [Common Settings] → [Condition Settings]
→ [Preview Settings] → [Preview Setting] → [Received Data Image Check Setting] is enabled
(administrator)".
* The factory default setting is disabled.
Depending on the size of the received data, part of the check image on the touch panel may not appear.
The received data list can also be shown in the job status screen that appears when you tap the job status display. The
received data can be forwarded, deleted, or saved from Received Data List.
► FORWARDING RECEIVED DATA MANUALLY (page 5-119)
► SAVING RECEIVED DATA (page 5-120)
When data is received,
1
Select External Application System Information
Event Information
Check Fax
Reception Image
Check Error Box
You can also display the received data list by tapping the job status display and tapping the [Check Received Data] key
on the action panel of Job Status screen.
2
Received Data List
Cancel All
• Tap to show thumbnails of received images(Thumbnail screen). The list view or thumbnails view can be changed
depending on the setting mode.
• To delete a received image, tap the [Delete] key on the action panel.
• To transfer the selected received image, tap the [Forward to Other Address] on the action panel.
► FORWARDING RECEIVED DATA MANUALLY (page 5-119)
• To save the selected received image, tap the [File] key.
► SAVING RECEIVED DATA (page 5-120)
is shown at the top of the screen.
Maintenance Information Toner Remaining
Check Confidential
Received Data
Release Held
Received Data
Fax Receive
Terminate
Remote Operation
Print
All Received Data
Check Image
Forward to Other Address
Delete
File
Store Data in Folder
In the System Information, tap the
Exit
[Event Information] tab and tap the
[Check Fax Reception Image] key
The received data is listed.
Tap the key of the received data you
wish to check, and tap the [Check
Image] key on the action panel
Displays the received data image.
5-111
in "Setting mode
*