Changing The Print Settings For The Transaction Report(Transaction Report) - Sharp MX-3070N User Manual

FACSIMILE►OTHERS FUNCTION
Tap the [Start] key to start scanning of the original.
8
• If you inserted the original pages in the document feeder tray, all pages are scanned.
A beep will sound to indicate that scanning has ended, and the machine stands by for transmission.
• When you place the original on the document glass, scan each page one at a time.
When scanning finishes, place the next original and tap the [Start] key. Repeat until all pages have been scanned and
then tap the [Read-End] key.
A beep will sound to indicate that scanning has ended, and the machine stands by for transmission.
When you use the auto document feeder to scan an original, you can tap the [Preview] key to check a preview of the
image before sending a fax. For more information, see
However, settings for this function cannot be changed in the preview screen.
The original is scanned into memory. The original cannot be scanned at a specified time.
CHANGING THE PRINT SETTINGS FOR THE
TRANSACTION REPORT(TRANSACTION REPORT)
A transaction report is automatically printed out to alert you when a transmission fails or when a broadcast transmission
is performed.
The transaction report contains a description of the transmission (date, start time, name of destination, time required,
number of pages, result, etc.).
INFORMATION APPEARING IN THE RESULT COLUMN (page 4-121)
►
Transaction reports are printed based on conditions set in the setting mode; however, you can temporarily select
different conditions for a transmission.
• Transaction reports are printed based on conditions set in "Setting mode"; however, you can temporarily select different
conditions for a transmission.
• For a broadcast transmission, changes to the transaction report print conditions apply to all destinations.
To set the printing conditions of transaction report:
In "Setting mode (administrator)", select [System Settings] → [Image Send Settings] → [Fax Settings] → [Default Settings] →
[Transaction Report Print Select Setting].
Place the original.
1
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
► AUTOMATIC DOCUMENT FEEDER (page 1-67)
► DOCUMENT GLASS (page 1-69)
Enter the destination fax number.
2
• Entering a destination number using the numeric
• Retrieving a destination from an address
• Using a search number to retrieve a
• Retrieving a destination from a global address
• Using a transmission log to
"CHECKING THE IMAGE TO BE TRANSMITTED (page
keys►page 4-11
book►page 4-12
destination►page 4-15
book►page 4-16
resend►page 4-18
4-98
4-28)".