Sharp MX-3070N User Manual page 798

SYSTEM SETTINGS►SYSTEM SETTINGS
Settings
Setup Items
Name
Search Root
LDAP Server
Server Type
User Identity Attribute
Search Attribute
Obtain E-mail address from
Obtain Internet Fax address from
Obtain Fax number from
Public Key Search
Pages Limit Group
Authority Group
Favourite Operation Group
My Folder
Card ID
Home Directory Path
User Name
PIN Code/Password
Custom Property 1-10
Port No.
Timeout
User Name
PIN Code/Password
Authentication
Bind Prefix
Server Usage
Enable SSL
Connection Test
When settings are changed, the changes will take effect after the machine is restarted. To restart the machine, see
"TURNING ON THE POWER".
Enter the address book name.
Enters the search defaults to search for a specific area of the LDAP directory information tree.
Example: o = ABC, ou = NY, cn = Everyone
Entries must be separated from each other by semicolons or commas.
Enter the IP address or host name of the LDAP server.
Select the Default or Custom from the service type list. The default setting is Default.
Set the user ID property. The default setting is "uid".
Set the LDAP search property. The default setting is "cn".
Set the e-mail address search. The default setting is "mail".
Set the Internet Fax address search. The default setting is "mail".
Set the fax number search. The default setting is "facsimileTelephoneNumber".
Sets the open key search. The default setting is "userCertificate".
Set the Storing Page Limit Group Search. The default setting is "pagelimit".
Set the Storing Authority Group Search. The default setting is "authority".
Set the Favorite Operation Group Search. The default setting is "favorite".
Set the My Folder Search. The default setting is "myfolder".
Sets the card ID search. The default setting is "cardid".
Enter a maximum of 127 full-width/half-width characters for the home directory path.
Enter a maximum of 127 full-width/half-width characters for the user name for home
directory path authentication.
Enter a maximum of 255 numeric digits for the password for home directory path
authentication.
Enter each custom property.
Enter a port number. The default setting is port 389.
Enter a timeout. The default setting is 5 seconds.
Enter the account name for LDAP setting.
Enter the password.
To change the password, set [Change Password] to
Select the authentication server from the drop-down list.
Set the Bind prefix. The default setting is "uid".
Set the server application.
Set the address book and user authentication.
Enables the SSL encryption communication.
Tap the [Execute] button, and the connection test is executed and its result is displayed.
7-141
Setting
.