Sharp MX-3070N User Manual page 552

SCANNER/INTERNET FAX►Other functions
• The settings stored in a program will be retained even after the program is used for transmission. The same settings can
be used repeatedly for transmission.
• The following contents cannot be stored in programs:
• Tapping of the [Speaker] key
• Custom Size
• Card shot
• Page changes and unspecified erases during preview
• Metadata<br />Settings
• Send Settings
• Own Name
• Sign E-mail
• Encrypt E-mail
• Up to 48 programs can be stored.
• Up to 500 destinations can be stored in one program.
• A program in which sub addresses and passcodes are specified as an F-code destination records all sub addresses and
passcodes.
This function cannot be used in data entry mode.
Tap the [Detail] key to switch to the normal mode.
1
► Changing mode from each mode (page 5-9)
Place the original and tap the [Call Program] key on the action panel.
2
According to the function stored in the program, place the original in the document feeder tray of the automatic
document feeder, or on the document glass.
► AUTOMATIC DOCUMENT FEEDER (page 1-67)
► DOCUMENT GLASS (page 1-69)
3
Address Book Address Touch to input Address
Call Program
Registered setting is called when touched.
Pre-Setting Program
01 02
Program 1
03 04
03
05 06
05
07 08
07
09 09 10
Others
Configure additional settings if needed.
4
Some settings cannot be added depending on the contents of the called program.
Change Name
Delete
Register in Favorite
Register for Home
02
04
06
Preview
08
10
Start
5-61
Tap the desired program key.
CA