Enable/Disable Settings; Disabling Of Optional Paper Drawer; Disabling Of Finisher; Disabling Of Stapler - Sharp MX-3070N User Manual

SYSTEM SETTINGS►SYSTEM SETTINGS

Disabling of Optional Paper Drawer

This setting is used to disable the optional paper drawer, such as when it malfunctions.
Disabling of Tray Settings/Paper Settings
This setting is used to prohibit tray settings (except for the bypass tray).

Disabling of Finisher

This setting is used to prohibit the use of finisher or saddle finisher, such as when it malfunctions.

Disabling of Stapler

This setting is used to prohibit the use of staple, such as when the staple of finisher or saddle finisher malfunctions.

Disabling of Punch

This setting is used to prohibit the use of punch, such as when the punch module of finisher or saddle finisher
malfunctions.
Disabling of Colour Mode
(When color-related problems occur)
When a color-related problem has occurred and printing is not possible, the use of color mode can be temporarily
prohibited. Black & white printing will still be allowed.
This function is only for use as an emergency measure. Once this setting is enabled, only a service technician can cancel the
setting. Promptly contact your dealer or nearest SHARP Service Department listed in the Start Guide to have a service
technician cancel the settings and resolve the problem.

Enable/Disable Settings

The following settings enables or disables certain functions.
User Control
Disabling of Printing by Invalid User
Printing by users whose information is not stored in the machine, such as printing without entering valid user information
in the printer driver or printing of a file on an FTP server in Setting mode (Web version), can be prohibited.
Copy Function Settings
Disable Copy in Different Size/Direction
You can prohibit copying when the orientation of the paper is different from the orientation of the original, or when the
appropriate size of paper is not loaded.
This setting is enabled when
Disabling of Registration/Deletion of Program
This is used to prohibit the deletion and changing of copy settings stored in job programs.
Disabling of Bypass-Tray in Duplex Copy
Disables the use of the bypass tray when making 2-sided copies.
The bypass tray is often used to feed label sheets, transparency film, and other special media for which 2-sided copying
is prohibited. If a sheet of one of these special media enters the reversing unit, a misfeed or damage to the unit may
result. If special media for which 2-sided copying is prohibited is often used, it is recommended that you enable this
setting.
"Rotation Copy Setting (page
7-124
7-77)" is disabled.