Removing Chromatic Colors From The Scanned Original Before Transmission(Drop Out Color) - Sharp MX-3070N User Manual

SCANNER/INTERNET FAX►Other functions
5
Others
Sharpness
Off
On
Back
To cancel the sharpness setting:
Tap the [Off] key.
Tap the [Start] key to start scanning of the original.
6
• If you inserted the original pages in the document feeder tray, all pages are scanned.
A beep will sound to indicate that scanning and transmission have ended.
• When you place the original on the document glass, scan each page one at a time.
When scanning finishes, place the next original and tap the [Start] key. Repeat the procedure until all pages have
been scanned and then tap the [Read-End] key.
A beep will sound to indicate that scanning and transmission have ended.
When you use the auto document feeder to scan an original, you can tap the [Preview] key to check a preview of the
image before sending an image. For more information, see
5-59)". However, settings for this function cannot be changed in the preview screen.
REMOVING CHROMATIC COLORS FROM THE
SCANNED ORIGINAL BEFORE TRANSMISSION(DROP
OUT COLOR)
This function cannot be used in Internet fax mode.
Place the original.
1
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
► AUTOMATIC DOCUMENT FEEDER (page 1-67)
► DOCUMENT GLASS (page 1-69)
Contrast
Adjust Contrast of Image
Resolution
Change Sending Resolution
Exposure
Specify density of image to send.
Color Mode
1 2 3 4 5
Less Sharp More Sharp
Preview
Tap or slide the slider to adjust
the contrast level.
After the settings are completed, tap
sequence.
CA
Start
"CHECKING THE IMAGE TO BE TRANSMITTED (page
5-81
and [Back] keys in