Initiating Polling Reception Manually - Sharp MX-3070N User Manual

FACSIMILE►OTHERS FUNCTION

INITIATING POLLING RECEPTION MANUALLY

Use the manual polling reception when you must start polling after listening to a recorded greeting, such as when using
a fax information service.
• Make sure there is no original in the machine when using the polling reception function.
• This function cannot be used to poll multiple machines (serial polling).
• The function can only be used when the other machine is Super G3 or G3 compatible and has a polling function.
The receiving machine bears the expense (phone charges) of the polling reception.
Enter the destination fax number.
1
• Entering a destination number using the numeric
• Retrieving a destination from an address
• Using a search number to retrieve a
• Retrieving a destination from a global address
• Using a transmission log to
One-touch key for a contact or group in which multiple destinations are stored, and one-touch key for which an address
other than fax number is stored cannot be used.
After tapping the [Speaker] key, you can tap the [Speaker Volume] key to adjust the volume of the speaker.
Tap the [Detail] key to change to normal mode.
2
► Changing mode from each mode (page 4-8)
3
Address Fax Number
Exposure
Auto
Resolution
Super Fine
Original
Job Build
Slow Scan Mode
Mixed Size Orig.
Original Count
Others
Tap the [Others] key, and tap the [Polling] key to receive originals (data).
4
A checkmark appears on the icon.
To cancel the Polling setting:
Tap the [Polling] key to clear the checkmark.
book►page 4-12
destination►page 4-15
resend►page 4-18
Sending History
Call Search Number
Direct TX
Verification Stamp
Call Program
Call Registered settings
Send Same Image
as Fax Address
Preview
Send Size
Scan Size
100%
Auto Auto
8½x11 8½x11
Speaker
reception memory 100%
keys►page 4-11
book►page 4-16
Tap the [Speaker] key.
You will hear the dial tone through the machine's speaker.
CA
Start
4-92