Sharp MX-3070N User Manual page 751

SYSTEM SETTINGS►SYSTEM SETTINGS
Set Image Orientation Automatically
The orientation of placed originals can be automatically detected. Set whether the original is scanned by one-sided
scanning or two-sided scanning.
Set Resolution Automatically
You can have the machine automatically set the resolution.
BlankPage Skip
Set whether or not blank original pages are automatically skipped during scanning.
Disable Scan Function
Specify this to disable remote PC scanning.
Preset restriction of E-mail for direct input
Enable this setting to prohibit e-mail transmission to an address that has an unsuitable domain. A file will not be sent if
the e-mail address is entered directly and the domain is one of the set domains.
Default Address
Default Address Setting
A default address can be stored that makes it possible to transmit by simply pressing the [Color Start] key or the [B/W
Start] key without specifying an address. If [Apply E-mail address of the user for login.] is selected, the E-mail address of
the login user is set as the default destination. When [Apply Home Directory of The User for Login] is selected, the
default address is the home directory of the user that logged in.
When the user logs in by internal authentication (authentication by the machine), the home directory setting of the user
that logged in is configured in "User Registration" in "User List" in "User Control". When the user logs in by external
authentication (network authentication), the home directory setting is configured in "Global Address Book Settings" in
"LDAP Settings" in "Network Settings".
Only a single default address can be set for Scan to E-mail, Scan to FTP, Scan to Desktop, and Scan to Network Folder.
Add Selected
Select an address that is to be used by default.
Apply E-mail address of the user for login.
The E-mail address of the login user is set as the default address.
Select the following items based on your intended use.
Setup Items
Apply also for Fax/I-Fax Screen
Allow Cancel
Apply Home Directory of The User for Login
The home directory of the login user is set as the default address.d
If an e-mail address is not set for the logged-in user, scanner transmission cannot be used.
In addition, when [Apply also for Fax/I-Fax Screen] is enabled, Fax and Internet Fax transmission cannot be used.
Select From Address Book
• To display you desired address book, narrow the search by alphabet or category with the list of [Index]. You can select
the number of addresses that are to be displayed at a time with [Display Items].
• When you select the desired address name and tap the [Store] key, the selected address can be selected for the
default address.
Allow cancel of the first entered address
This allows cancellation of transmission to an address that is pre-entered by default.
In the fax/I-Fax screen, if you do not want to apply the E-mail address of the login user as
the default destination, tap the [Apply also for Fax/I-Fax Screen] checkbox to set to
You can cancel the E-mail address of the login user that is entered automatically. To
cancel, tap the [Cancel] key on the action panel.
7-94
Description
.