Card Area Setting; Card Type/Reader Settings - Sharp MX-3070N User Manual

SYSTEM SETTINGS►USER CONTROL

Card Area Setting

The data check during card reading can be set.
Settings
Item
Check System Code only in
FeliCa User Area mode
Check Facility Code in HID mode
Facility Code
Importing from the setup file

CARD TYPE/READER SETTINGS

Use these settings for authentication and for use of a HID or other IC card.
Settings
Item
Card Type / Card Reader
Use IC Card for Authentication
Card Reader Device Registration
In this setting, the product ID and vender ID of the connected HID card reader are displayed. To store the HID card
reader, touch the [Read] key.
For settings that enable an HID card to be used, consult your service technician.
Check the System Code only in FeliCa User Area mode.
Checks the facility code of a HID card.
Enters the facility code of a HID card. When you tap the [Store] key, the facility code is
stored.
When you enter the configuration file name and tap the [Execute] key, the card area
settings are read from the configuration file. If you tap the [Clear] key, all files that match the
current search conditions are deleted.
Enter the card type and card reader information.
Use these settings for authentication and for use of a HID or other IC card.
7-75
Description
Description