Error Codes - Ricoh D117 Service Manual

Mainframe Installation
SP5816-208 Error Codes
Cause Code
-12002
-12003 Attempted registration without
-12004 Attempted setting with illegal
-12005 @Remote communication is
Operation Error, -12006 A confirmation request was
Incorrect Setting
-12007 The request number used at
-12008 Update certification failed
-12009 The ID2 in the NVRAM does
-12010 The certification area is not
-2385 Other error
Error Caused by
Response from
-2387 Not supported at the Service
GW URL
D117/D118
Meaning
Inquiry, registration attempted
without acquiring Request No.
execution of a confirmation and
no previous registration.
entries for certification and ID2.
prohibited. The device has an
Embedded RC gate-related
problem.
made after the confirmation
had been already completed.
registration was different from
the one used at confirmation.
because mainframe was in
use.
not match the ID2 in the
individual certification.
initialized.
Center
2-16
Solution/ Workaround
Obtain a Request Number
before attempting the
Inquiry or Registration.
Perform Confirmation
before attempting the
Registration.
Check ID2 of the
mainframe.
Make sure that "Remote
Service" in User Tools is
set to "Do not prohibit".
Execute registration.
Check Request No.
Check the mainframe
condition. If the mainframe
is in use, try again later.
Check ID2 of the
mainframe.
Initialize the certification
area.
SM