Tonner End Detection: Set; Toner Status: Display; Toner Remaining: Display - Ricoh D117 Service Manual

Main SP Tables-3
3100

[Tonner End Detection: Set]

001 ON/OFF
002 NE Detection
3101

[Toner Status: Display]

001 Bk
002 C
003 M
004 Y
3102

[Toner Remaining: Display]

001 Bottle Motor: Bk
002 Bottle Motor: C
003 Bottle Motor: M
004 Bottle Motor: Y
011 Pixel: Bk
012 Pixel: C
013 Pixel: M
014 Pixel: Y
021 Fill Amount: Bk
022 Fill Amount: C
023 Fill Amount: M
D117/D118
Sets if NE/TE is detected or not.
*ENG [0 or 1 / 0 / 1/step]
0:Detect, 1:NotDetect
Sets NE/TE detection mode.
*ENG [0 or 1 / 0 / 1/step]
0:ALL, 1:TESensor
*ENG
Displays the toner remaining status.
*ENG
[0 to 2 / - / 1/step]
*ENG
2: -l, 1: -, 0:-
*ENG
*ENG
Displays the toner remaining amount
*ENG
calculated with motor driving time.
*ENG
[0.000 to 500.000 / - / 0.001g/step]
*ENG
*ENG
Displays the toner remaining amount
*ENG
calculated with image processing
coverage.
*ENG
[0.000 to 500.000 / - / 0.001g/step]
*ENG
*ENG
Displays the toner amount in a new
*ENG bottle.
[0 to 500 / - / 1g/step]
*ENG
3-192 SM Appendix