2.
Install the wireless LAN board [A] (Knob
3.
Make sure that the machine can recognize the option (see "Check All Connections" at the end
of this section).
1: Rear
2: Left
4.
Peel off the double-sided tapes on the Velcro fasteners [A], and then attach them [A] at the
front left and rear of the machine.
5.
Attach "ANT1" (having a black ferrite core) [B] to the rear of the machine.
SM
x 2) into the board slot.
2-95
Controller Options
D117/D118