Ricoh D117 Service Manual page 121

4. Route the USB cable [A] from the IC card reader as shown above (
5. Pull out the USB cable from the rear of the machine.
6. Cut out the hole for the USB cable to pass through the rear upper cover [A].
7. Pass the USB cable from the IC card reader through the hole in the upper rear cover, and
then reassemble the machine.
8. Attach the clamps [A] to prevent the cable from sagging.
9. Connect the USB cable to the USB receptor at the left of the mainframe as shown above.
Either receptor can be used.
SM
IC Card Reader (External Option)
2-81
x 5).
D117/D118