SC Tables
No.
Type
SD card error
The 'all delete' function cannot be executed but DataOverwriteSecurity
Unit is installed and activated.
CTL
877
B
1. Replace the NVRAM and then install the new SD card.
2. Check and reinstall the SD card.
No.
Type
TPM system authentication error
The system firmware is not authenticated by TPM (security chip).
878
CTL
-00
D
1. Replace the controller board.
USB Flash Error
File system in the USB flash device is defective.
-01
D
1. Replace the controller board.
TPM Error
An error occurred in TPM or in TPM driver.
-02
D
1. Replace the controller board.
TCSD Error
-03
D
An error occurred in TPM software stack.
D117/D118
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Defective SD card
SD card not installed
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Incorrect updating for the system firmware
Defective flash ROM on the controller board
Cannot mount partition 3 in the USB flash device.
Encryption key does not exist.
Cannot find the file for KMMD to be operated.
TPM defective
6-68
SM