Main SP Tables-5
5114
[Optional Counter I/F]
001 MF Key Card Extension
[Disable Copying]
5118
This program disables copying.
001 Disable Copying
[Mode Clear Opt. Counter Removal]
5120
This program updates the information on the optional counter. When you install
or remove an optional counter, check the settings.
001 0:Yes 1:StandBy 2:No
[Counter Up Timing]
5121
This program specifies when the counter goes up. The settings refer to "paper
feed" and "paper exit" respectively.
001 0:Feed 1:Exit
[APS Mode]
5127
This program disables the APS.
001 APS Mode
D117/D118
[0 or 1 / 0 / 1/step]
*CTL
0: Not installed
1: Installed (scanning accounting)
[0 or 1 / 0 / 1/step]
*CTL
0: Not disabled
1: Disabled
[0 to 2 / 0 / 1/step]
0: Yes (removed)
*CTL
1: Standby (installed but not used)
2: No (not removed)]
[0 or 1 / 0 / 1/step]
*CTL
0: Feed, 1: Exit
[0 or 1 / 0 / 1/step]
*CTL
0: Not disabled
1: Disabled
3-294
SM Appendix