Ricoh D117 Service Manual page 954

Main SP Tables-8
ADF Org Feeds
8 221
These SPs count the number of pages fed through the ADF for front and back
side scanning.
Front
Number of front sides fed for scanning:
With an ADF that can scan both sides simultaneously, the Front side count is
8 221
the same as the number of pages fed for either simplex or duplex scanning.
-001
With an ADF that cannot scan both sides simultaneously, the Front side count
is the same as the number of pages fed for duplex front side scanning. (The
front side is determined by which side the user loads face up.)
Back
Number of rear sides fed for scanning:
8 221 With an ADF that can scan both sides simultaneously, the Back count is the
-002 same as the number of pages fed for duplex scanning.
With an ADF that cannot scan both sides simultaneously, the Back count is the
same as the number of pages fed for duplex rear-side scanning.
When 1 sheet is fed for duplex scanning the Front count is 1 and the Back count is 1.
If a jam occurs during the job, recovery processing is not counted to avoid double counting.
Also, the pages are not counted if the jam occurs before the first sheet is output.
Scan PGS/Mode
8 231
These SPs count the number of pages scanned by each ADF mode to
determine the work load on the ADF.
8 231
Large Volume
-001
8 231
SADF
-002
8 231
Mixed Size
-003
8 231
Custom Size
-004
D117/D118
*CTL [0 to 9999999/ - / 1]
*CTL
[0 to 9999999/ - / 1]
Selectable. Large copy jobs that cannot be
loaded in the ADF at one time.
Selectable. Feeding pages one by one through
the ADF.
Selectable. Select "Mixed Sizes" on the operation
panel.
Selectable. Originals of non-standard size.
3-452 SM Appendix