Ricoh D117 Service Manual page 74

1-Bin Tray Unit (D574)
The flat cable [B] should go through the ferrite cores [C].

The harnesses [A] and the flat cable [B] should be routed under the harness [D]

when these are reconnected.
Never connect the flat cable [B] obliquely. Otherwise, the scanner unit may be

damaged.
21. Attach the grounding plate [A] (Upper:
22. Attach the rear right cover [A] (
23. Attach the rear upper right cover [B] (M3x10:
24. Attach the left cover [C] (from the accessories, not the original cover) (M3x10:
25. Attach the rear upper cover [D] (M3x10:
26. Attach the rear cover [E] (
D117/D118
(blue) [B] x 1, Lower:
x 3).
x1).
x 1).
x 13).
2-34
x 1 (existing) [C])
x 2).
SM