Table of Contents
Advertisement
Controller Options
2.14.6 BLUETOOTH INTERFACE UNIT TYPE D
Unplug the main machine power cord before you do the following procedure.
You can only install one of the following network interfaces at a time: (IEEE 802.11a/g, g (Wireless
LAN), Bluetooth).
Do not remove the Bluetooth unit while the power of the machine is on.
1.
Turn off the power of the machine, and then unplug the power cable from the wall outlet.
2.
Insert the Bluetooth Interface adapter [A] into the USB connector (Either USB connector can
be connectable).
3.
Plug the power cable and turn on the power of the machine.
4.
Make sure that the machine can recognize the option (see "Check All Connections" at the end
of this section).
The Bluetooth interface unit and the Wireless LAN interface unit cannot be used
simultaneously.
D117/D118
2-98
SM
Advertisement
Table of Contents
Troubleshooting
