Line Position Adjustment Result - Ricoh D117 Service Manual

Process Control Error Conditions

6.2.3 LINE POSITION ADJUSTMENT RESULT

SP2-194-010 to -012 (Line Position Adjustment Result: M, C, Y)
This SP shows the number as a line position adjustment result on the LCD. It shows which color
has an error (M, Y or C).
No. Result
0 Not done
Completed
1
successfully
Cannot detect
2
patterns
Fewer lines on
3 the pattern than
the target
More lines on
4 the pattern than
the target
Out of the
5 adjustment
range
6-9 Not used
For details, see the "Troubleshooting Guide - Line Position Adjustment" section.

D117/D118
Description
Line position adjustment has not been done.
Line position adjustment has correctly been
done,
ID sensors have not detected the patterns for
line position adjustment.
The patterns, which ID sensors have detected,
are not enough for line position adjustment.
Not used in this machine.
ID sensors have correctly detected the patterns
for line position adjustment, but a shift of
patterns is out of adjustable range.
-
6-80
Note
-
-
See Note
See Note
-
See Note
-
SM