Reboot/System Setting Reset; System Settings And Copy Setting Reset; Software Reset - Ricoh D117 Service Manual

Reboot/System Setting Reset

5.6 REBOOT/SYSTEM SETTING RESET

5.6.1 SOFTWARE RESET

You can reboot the software with one of the following two procedures:
1. Turn the main power switch off and on.
2. Press and hold down
once, release both buttons. After "Now loading. Please wait" shows for a few seconds, the
copy window will open. The machine is ready for normal operation.

5.6.2 SYSTEM SETTINGS AND COPY SETTING RESET

System Setting Reset
The system settings in the UP mode can be reset to their defaults. Use the following procedure.
1. Press User Tools/Counter
2. Hold down and then press System Settings.
You must press
3. Press yes when the message prompts you to confirm that you want to reset the system
settings.
4. Press exit when the message tells you that the settings have been reset.
D117/D118
and together for over 10 seconds. When the machine beeps
.
first.
5-26 SM