241 Paper Jams - Lexmark MX610 Service Manual

Duplex service check
Action
Step 1
a
Remove the rear cover.
b
Check the redrive rollers for wear or damage.
Are they free of wear or damage?
Step 2
a
Remove the left cover. See
b
POR into the Diagnostics menu and navigate to:
DUPLEX TESTS >Duplex Feed 1
c
Check the reverse solenoid for proper operation.
Does it function properly?
Step 3
a
Remove the input tray.
b
From under the printer, check the duplex gear assembly and duplex
link for wear and damage.
Are the they free of wear and damage?
Step 4
From under the printer, check the duplex, belt, and roller for wear and
damage.
Are they free of wear and damage?
Step 5
a
POR into the Diagnostics menu and navigate to:
DUPLEX TESTS >Sensor Test
b
Lower the jam access cover, and toggle the duplex sensor.
Does the sensor state on the control panel change when it is toggled?
Step 6
Does the error remain?

241 paper jams

[x]‑page jam, open tray [1]. [241.xx]
1
Pull out the tray completely.
Note: The message on the printer display indicates the tray where the jammed paper is located.
"Left cover removal" on page
Diagnostic information
Yes
Go to step 2.
Go to step 3.
239.
Go to step 4.
Go to step 5.
Go to step 6.
Contact the next level
of support.
64
7016
No
Replace the redrive
assembly. See "Redrive
assembly removal" on
page 318.
Replace the reverse
solenoid. See "Reverse
solenoid removal" on
page 248.
Replace the duplex
gear assembly. See
"Duplex gear assembly
removal" on page
250.
Replace the duplex.
See "Duplex removal"
on page 299.
Replace the duplex
sensor. See "Duplex
sensor and input
sensor removal" on
page 300.
The problem is solved.