Scanner Assembly Removal - Lexmark MX610 Service Manual

7
Remove the ADF unit.
Installation note: After the new ADF is installed, perform scanner manual registration, see
registration" on page 205

Scanner assembly removal

1
Remove the diverter cover. See
2
Remove the rear cover assembly. See
3
Open the front access cover. See
4
Remove the left cover. See
5
Remove the right cover. See
6
Remove the controller board shield. See
and scanner calibration, see
"Diverter cover removal" on page
"Rear cover removal" on page
"Front access cover removal" on page
"Left cover removal" on page
"Right cover removal" on page
"Controller board shield removal" on page
Repair information
"Scanner calibration" on page
323.
318.
291.
239.
252.
336
"Scanner manual
181.
259.
7016