Sensor (Stapler Paddle Hp) Removal - Lexmark MX610 Service Manual

11
Disconnect the sensor cable (A). Release the latches, and then remove the sensor.

Sensor (stapler paddle HP) removal

1
Remove the stapler right cover. See
2
Remove the stapler left cover. See
3
Remove the stapler rear cover. See
4
Remove the stapler service cover. See
5
Remove the stapler controller card. See
6
Remove the stapler cooling fan. See
7
Remove the stapler power supply unit. See
8
Remove the stapler top cover. See
"Stapler right cover removal" on page
"Stapler left cover removal" on page
"Stapler rear cover removal" on page
"Stapler service cover removal" on page
"Stapler controller card removal" on page
"Stapler cooling fan removal" on page
"Stapler power supply unit removal" on page
"Stapler top cover removal" on page
Repair information
395
355.
356.
364.
368.
368.
372.
372.
376.
7016