Tamper Drive Belt Removal - Lexmark MX610 Service Manual

12
Remove the four screws (B), and then remove the sub-assembly.

Tamper drive belt removal

1
Remove the stapler right cover. See
2
Remove the stapler left cover. See
3
Remove the stapler rear cover. See
4
Remove the stapler service cover. See
5
Remove the stapler controller card. See
6
Remove the stapler cooling fan. See
7
Remove the stapler power supply unit. See
8
Remove the stapler top cover. See
9
Remove the tamper main assembly. See
10
Remove the tamper sub-assembly. See
11
Remove the tamper motors. See
motor removal" on page
"Stapler right cover removal" on page
"Stapler left cover removal" on page
"Stapler rear cover removal" on page
"Stapler service cover removal" on page
"Stapler controller card removal" on page
"Stapler cooling fan removal" on page
"Stapler power supply unit removal" on page
"Stapler top cover removal" on page
"Tamper main assembly removal" on page
"Tamper sub-assembly removal" on page
"Stapler left tamper motor removal" on page 368
369.
Repair information
355.
356.
364.
372.
376.
389
368.
368.
372.
386.
387.
and "Stapler right tamper
7016