Lexmark MX610 Service Manual page 74

Option tray jam service check
Action
Step 1
Restart the printer.
Does it fail to complete the POST sequence and display a 242.01 error?
Step 2
a
POR into the Diagnostics menu and perform a feed test:
Diagnostics Menu > Input Tray Tests > Feed Test >
Select an option tray > Continuous
b
Cancel the test after five pages.
Does the printer successfully feed the five pages into the output bin?
Step 3
Does the printer display a 242.06 error?
Step 4
Check the pick roller assembly.
Is it free of wear or damage?
Step 5
Check the separator roll assembly.
Is it free of wear or damage?
Step 6
Check the tray guides, lift plate, and lift plate gears.
Are they free of wear or damage?
Step 7
Check the ACM assembly.
Is it free of wear or damage?
Step 8
POR into the Diagnostics menu and perform a feed test:
Diagnostics Menu > Input Tray Tests > Feed Test > Select an option tray
Does the pick/lift motor gearbox pass the test?
Step 9
Does the error remain?
Yes
Replace the option
tray.
The problem is solved. Go to step 3.
Replace the ACM
assembly. See
assembly removal" on
page
Go to step 5.
Go to step 6.
Go to step 7.
Go to step 8.
Go to step 9.
Contact the next level
of support.
Diagnostic information
74
No
Go to step 2.
Go to step 4.
"ACM
349.
Replace the pick roller
assembly. See
roller removal" on
page 346.
Replace the separator
roll assembly. See
"Separator roll
assembly removal" on
page 347.
Replace the tray insert.
Replace the ACM
assembly. See
assembly removal" on
page 349.
Replace the option
tray.
The problem is solved.
7016
"Pick
"ACM