Load [Paper Source] With [Custom Type Name] [Paper Orientation]; Load [Paper Source] With [Custom String] [Paper Orientation]; Load [Paper Source] With [Paper Size] [Paper Orientation]; Load [Paper Source] With [Paper Type] [Paper Size] [Paper Orientation] - Lexmark MX610 Service Manual

Load [paper source] with [custom type name] [paper orientation]

Try one or more of the following:
•
Load the tray or feeder with the correct size and type of paper.
•
To use the tray with the correct paper size or type, touch Finished loading paper on the printer control panel.
Note: If the printer detects a tray that has the correct paper size and type, then it feeds from that tray. If the
printer cannot detect a tray that has the correct paper size and type, then it prints from the default paper
source.
•
Cancel the current job.

Load [paper source] with [custom string] [paper orientation]

Try one or more of the following:
• Load the indicated tray or feeder with the correct size and type of paper.
•
To use the tray with the correct paper size or type, touch Finished loading paper on the printer control panel.
Note: If the printer finds a tray that has the correct paper size and type, then it feeds from that tray. If the
printer cannot find a tray with the correct paper type and size, then it prints from the default paper source.
• Cancel the current job.

Load [paper source] with [paper size] [paper orientation]

Try one or more of the following:
•
Load the specified tray or feeder with the correct size of paper.
•
To use the tray or feeder with the correct size of paper, touch Finished loading paper on the printer control panel.
Note: If the printer finds a tray or feeder that has the correct size of paper, then it feeds from that tray or
feeder. If the printer cannot find a tray or feeder with the correct size of paper, then it prints from the default
paper source.
•
Cancel the current job.

Load [paper source] with [paper type] [paper size] [paper orientation]

Try one or more of the following:
•
Load the specified tray or feeder with the correct size and type of paper.
•
To use the tray or feeder with the correct size and type of paper, touch Finished loading paper on the printer control
panel.
Note: If the printer finds a tray or feeder that has the correct size and type of paper, then it feeds from that tray
or feeder. If the printer cannot find a tray or feeder with the correct size and type of paper, then it prints from
the default paper source.
• Cancel the current job.
Diagnostic information
103
7016