Media Present Sensor Flag Removal - Lexmark MX610 Service Manual

10
Remove the screw (C).

Media present sensor flag removal

1
Remove the left cover. See
2
Remove the rear door and cover. See
318.
3
Remove the power supply. See
4
Remove the power supply shield. See
5
Remove the duplex. See
6
Position the printer so that it sits on its left side.
7
Remove the retainer spring (A).
8
Remove the two springs (B).
A
"Left cover removal" on page
"Rear exit door removal" on page 317
"Power supply removal" on page
"Power supply shield removal" on page
"Duplex removal" on page
Repair information
B C
239.
and
298.
299.
307
"Rear cover removal" on page
298.
7016