Maintenance Kit Nearly Low [80.Xy]; Maintenance Kit Very Low, [X] Estimated Pages Remain [80.Xy]; Memory Full [38]; Memory Full, Cannot Print Faxes - Lexmark MX610 Service Manual

Maintenance kit nearly low [80.xy]

For more information, contact customer support at
necessary, touch Continue to clear the message and continue printing.

Maintenance kit very low, [x] estimated pages remain [80.xy]

You may need to replace the maintenance kit very soon. For more information, contact customer support at
http://support.lexmark.com
continue printing.

Memory full [38]

Try one or more of the following:
• From the printer control panel, touch Cancel job to clear the message.
•
Install additional printer memory.

Memory full, cannot print faxes

From the printer control panel, touch Continue to clear the message without printing. Held faxes attempt to print after
the printer is restarted.

Memory full, cannot send faxes

1
From the printer control panel, touch Continue to clear the message and cancel the fax job.
2
Try one or more of the following:
• Reduce the fax resolution, and then resend the fax job.
•
Reduce the number of pages in the fax, and then resend the fax job.

Network [x] software error [54]

Try one or more of the following:
•
From the printer control panel, touch Continue to continue printing.
• Turn off the printer, wait for about 10 seconds, and then turn the printer back on.
•
Update the network firmware in the printer or print server. For more information, contact customer support.

No analog phone line connected to modem, fax is disabled.

Connect the printer to an analog phone line.
http://support.lexmark.com
or your service representative. If necessary, touch Continue to clear the message and
Diagnostic information
or your service representative. If
105
7016