111 Errors - Lexmark MX610 Service Manual

111 errors

111 error messages
Error code Description
111.00 Pel clock check failed.
111.01 Downlevel ASIC detected.
111.31 Printhead never delivered HSYNCs.
111.32 Printhead lost HSYNCs.
111.40 Wrong printhead installed
111.50 Open-loop printhead error, open-loop sweep state.
111.51 Open-loop printhead error, open-loop sweep state.
111.52 Open-loop printhead error, check prelim amp state.
111.53 Open-loop printhead error, enable amp Kp state.
111.54 Closed-loop printhead error, amp Kp failed to
converge.
111.55 Closed-loop printhead error while waiting for amp Kp
to converge.
111.56 Closed-loop printhead error, amp Ki failed to
converge.
111.57 Closed-loop printhead error while waiting for amp Ki
to converge.
111.58 Closed-loop printhead error, load scan regs state.
111.59 Closed-loop printhead error, forward and reverse
capture times differ by too much.
111.60 Closed-loop printhead sweep error, check sweep
accuracy state.
111.61 Printhead drive control out of range due to an
external event beyond what the control is designed
to handle.
111.62 Closed-loop printhead error, off-resonant PI effort
state.
111.63 Timed out on POR sweep.
111.64 Attempted to exceed open loop drive limits.
111.65 Attempted to exceed open loop drive limits.
111.66 Failed alignment of printhead.
111.67 Attempted to exceed open loop drive limits.
111.68 Too many fake HSYNCs while aligning printhead.
111.69 Attempted to exceed open loop drive limits.
Action
Go to "LSU service check" on page
Go to "LSU service check" on page
Diagnostic information
118
7016
119.
119.