Restraint Pad Removal - Lexmark MX610 Service Manual

8
Feed the speaker cable through the channel on the right side of the printer.

Restraint pad removal

1
Open the ADF top cover.
2
Peel the restraint pad off of the ADF top cover. Be sure that any excess adhesive or pieces of pad are removed from
the ADF top cover to avoid misfeeds.
Warning—Potential Damage: Be sure that any excess adhesive or pieces of pad are removed from the ADF top
cover to avoid misfeeds. Do not use solvents to remove the residue. This will damage the plastic.
Repair information
345
7016