Lexmark MX610 Service Manual page 54

9
Close the front door.
10
From the printer control panel, select Continue to clear the message and continue printing.
200 paper jam messages
Error code Description
200.01 Input sensor covered during warm-up sequence.
200.02 Input sensor covered too quickly.
200.03 Media did not reach input sensor from MPF.
200.05 Input sensor covered too long.
200.07 Input sensor failed to become uncovered from sheet
ahead.
200.08 Page arrive at input senor at unexpected time.
200.09 Printhead did not receive proper motor feedback to
start laser servo.
200.10 Printhead motor not locked when media reaches the
input sensor.
200.11 Printhead motor fell out of lock after page reaches the
input sensor.
200.12 Printhead was not ready for media.
200.13 Media at input sensor is not the next media to be
imaged.
200.14 Media reached the input sensor before EP was ready. Go to
200.15 Image data did not start on time.
200.16 Fuser motor stalled.
200.19 Page that was successfully picked from option tray
never reached the input sensor.
200.21 No response from paper port driver while waiting for
the source to deactivate the Input Source Ready flag
to indicate it has initiated picking.
200.23 Laser servo never started due to potential conflict
with the transfer servo.
Action
Go to "Sensor (input) static jam service check" on
page 55.
Go to "Sensor (input) early/late arriving service
check" on page
Go to "Sensor (input) early/late arriving service
check" on page
Go to "Sensor (input) early/late arriving service
check" on page
Go to "Sensor (input) early/late arriving service
check" on page
Go to "Sensor (input) early/late arriving service
check" on page
Go to "Sensor (input) image jam service check" on
page 57.
Go to "Sensor (input) image jam service check" on
page 57.
Go to "Sensor (input) image jam service check" on
page 57.
Go to "Sensor (input) image jam service check" on
page 57.
Go to "Sensor (input) image jam service check" on
page 57.
"Sensor (input) image jam service check" on
page 57.
Go to "Sensor (input) image jam service check" on
page 57.
Go to "Main drive motor control jam service check"
on page
Go to "Sensor (input) early/late arriving service
check" on page
Go to "Sensor (input) early/late arriving service
check" on page
Go to "Sensor (input) image jam service check" on
page 57.
Diagnostic information
54
56.
56.
56.
56.
56.
58.
56.
56.
7016