Figure 39-1 Menu 25 Ip Routing Policy Setup - ZyXEL Communications Prestige 660W Series User Manual

Prestige 660W/HW Series User's Guide
IPPR follows the existing packet filtering facility of RAS in style and in implementation. The policies are
divided into sets, where related policies are grouped together. A user defines the policies before applying
them to an interface or a remote node, in the same fashion as the filters. There are 12 policy sets with six
policies in each set.
39.4 IP Routing Policy Setup
Menu 25 shows all the policies defined.
To setup a routing policy, perform the following procedures:
Step 1.
Type 25 in the main menu to open Menu 25 – IP Routing Policy Setup.
Step 2. Type the index of the policy set you want to configure to open Menu 25.1 – IP Routing Policy
Setup.
Menu 25.1 shows the summary of a policy set, including the criteria and the action of a single policy, and
whether a policy is active or not. Each policy contains two lines. The former part is the criteria of the
incoming packet and the latter is the action. Between these two parts, separator "|" means the action is taken
on criteria matched and separator "=" means the action is taken on criteria not matched.
39-2
Menu 25 - IP Routing Policy Setup
Policy
Set # Name
------ -----------------
1 test
2 _______________
3 _______________
4 _______________
5 _______________
6 _______________
Enter Policy Set Number to Configure= 0
Edit Name= N/A
Press ENTER to Confirm or ESC to Cancel:

Figure 39-1 Menu 25 IP Routing Policy Setup

Policy
Set # Name
------ -----------------
7 _______________
8 _______________
9 _______________
10 _______________
11 _______________
12 _______________
IP Policy Routing