Secure Ftp Using Ssh Example; Figure 185 Ssh Example 2: Test; Figure 186 Ssh Example 2: Log In - ZyXEL Communications ZyWall 35 User Manual

ZyWALL 35 User's Guide

Figure 185 SSH Example 2: Test

2 Enter "ssh –1 192.168.1.1". This command forces your computer to connect to
the ZyWALL using SSH version 1. If this is the first time you are connecting to the
ZyWALL using SSH, a message displays prompting you to save the host information of
the ZyWALL. Type "yes" and press [ENTER].
Then enter the password to log in to the ZyWALL.

Figure 186 SSH Example 2: Log in

$ ssh –1 192.168.1.1
The authenticity of host '192.168.1.1 (192.168.1.1)' can't be
established.
RSA1 key fingerprint is
21:6c:07:25:7e:f4:75:80:ec:af:bd:d4:3d:80:53:d1.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.1.1' (RSA1) to the list of known
hosts.
Administrator@192.168.1.1's password:
3 The SMT main menu displays next.

22.10 Secure FTP Using SSH Example

This section shows an example on file transfer using the OpenSSH client program. The
configuration and connection steps are similar for other SSH client programs. Refer to your
SSH client program user's guide.
1 Enter "sftp –1 192.168.1.1". This command forces your computer to connect to
the ZyWALL for secure file transfer using SSH version 1. If this is the first time you are
connecting to the ZyWALL using SSH, a message displays prompting you to save the
host information of the ZyWALL. Type "yes" and press [ENTER].
2 Enter the password to login to the ZyWALL.
3 Use the "put" command to upload a new firmware to the ZyWALL.
362
$ telnet 192.168.1.1 22
Trying 192.168.1.1...
Connected to 192.168.1.1.
Escape character is '^]'.
SSH-1.5-1.0.0
Chapter 22 Remote Management