Pto Cable Adjustment - Toro Workman HDX Service Manual

Adjustments
PTO Cable Adjustment (If Equipped)
1. Remove clevis pin that secures PTO cable to PTO le-
ver arm.
2. Loosen clevis jam nut and adjust clevis so clevis hole
aligns with hole in PTO lever arm.
3. Tighten jam nut making sure that holes in clevis and
lever arm still align.
4. Secure PTO cable clevis to PTO lever arm with clevis
pin.
Workman HD Series
2
1. PTO lever arm
2. PTO cable
Page 6 - - 5
4
1
Figure 3
3. Clevis pin
4. Clevis jam nut
Drive Train
3