Toro Workman HDX Service Manual page 147

Brakes (Continued)
Problem
Brakes pulling.
Dragging brakes.
Hard brake pedal.
Wheel locks.
Brakes fade.
Brakes surge at slow speeds and chatter at fast
speeds.
Workman HD Series
Possible Causes
Incorrect tire pressure.
Contaminated brake pads.
Front end is out of alignment.
Bent or damaged brake rotors.
Damaged brake hoses.
Parking brake caliper or cable is sticking or damaged.
Unmatched tires on same axle.
Parking brake is engaged or sticking.
Improper parking brake adjustment.
Weak or broken parking brake return spring.
Binding brake pedal.
Sticking brake master cylinder.
Saturated brake pads.
Scored or bent brake rotors.
Incorrect brake pad material.
Damaged brake hoses.
Brake pedal linkage is binding.
Contaminated brake pads.
Loose or damaged brake pads.
Wheel caliper is sticking.
Sticking brake master cylinder.
Wheel bearing is seized.
Overheated brake rotors.
Saturated brake pads.
Warped or unevenly worn brake rotors.
Page 7 - - 7 Chassis