Toro Workman HDX Service Manual page 123

NOTE: The thickest shim of the shim set (item 2) should
be positioned against the snap ring (Fig. 94).
23.Insert tabbed shim (item 4) against the bearing. In-
sert shim set (item 2) against the tabbed shim. Use thick-
est shims in set possible, that will permit installation of
the snap ring. (Fig. 94 and 95).
24.Install snap ring into the groove of the bearing hous-
ing (Fig. 95 and 96).
Workman HD Series
3
1
3
6
4
1. Countershaft
2. Bearing
3. Shims
Page 6 - - 47
2
Figure 94
5
1
2
Figure 95
4. Snap ring
5. Center plate
6. Sealing cap
Figure 96
Drive Train
4